PTO Parts - Yokes

0805SRA New Idea YOKE and Clutch Facing

G&G Double Chain Coupler 1-3/8" x 21 Splines both Sides, QDC one side, 14T #60 Chain

Series 12 Implement YOKE 6 Spline 1-1/8"ID Bore Cap Holes 1-1/16", Internal Snap Ring Cross Drilled 21/64 or .328" Interchanges with Weasler Part Number 801-1218. Item pictured is what you will receive.  This is a new but at least a 20 year old part...

Double Center U Joint Assembly. *** 7.25" long center on the cap holes.*** This is a 35 Series Double Yoke 1.25" Caps External Snap Rings. Please verify which size cross bearing you have.  7.25" long center on the cap holes. Overall 9.00"L x 3...

WELDAJOINT Yoke by G&G Mfg Omaha, NE 35N Series Counter Bore 2.00" Casting Number 35041 Designed to insert matching Tube or Bushing into this yoke, then weld together.

Bondioli & Pavesi    100 Series Size 5 Yoke.   Tri Lobe Bore 51.75 mm or 2.00" across in line with cross drilled hole 10 mm ID. Cross bearing Cap size 30.20 mm x 80mm Wide. The 79.37 or 3-1/8" would use a Bush Hog 64610 cross...

Implement Yoke with 8mm or 5/16" Keyway I've spec'ed out everything I can think of. Be sure to note the Set Screw Hole is NOT over the Keyway Slot like most, it is a turn 1/4 off. But according to Bondioli & Pavesi this is accurate. Questions? Call...

PTO Weld Yoke 3/4" x 7/8" Rectangular Bore Imperial or SAE Series 6 Cap Size: 0.97" Width Cap to Cap: 2.28”. Internal Snap Ring Safety Shield Bearing Groove 1.96"OD Interchanges with: 177-0600, 300-0600, 340-660, 540-052, 6NWY1214.  

Shear Sleeve Yoke, 35N, Shear Pin Holes 7/16"ID Sleeve 2.12"ID x 2.50" Deep. New old stock Woods part. Woods Shear Pin Part Number 11895 -7/16" x 3.00" Drilled Shear Pin

Series 14 Implement YOKE Cap Holes 1-1/8" 1.25"ID Bore .25" Keyway 3/8" Setscrew Interchanges with Neapco Part Number 20-9119. Item pictured is what you will receive.  This is a new but at least 20 years old part that never got any paint. All the...

Series 12 Implement PTO Yoke 1.06" ID caps and internal snap rings, 1-3/8" 6 Spline Bore. Cross drilled 21/64" or .328"ID and 1.12" from center to end. Interchanges with: A&I A-D128106,  Weasler 801-1206,  Neapco 12-1172,  Tisco...

Yoke 35 Series Cross Bearing Cap 1.25" External Sap Ring. Round Bore 1.37"ID and has two Keyways; .31"/ 5/16" and .37" /3/8"Wide. Each Keyway has a set screw and are included. Casting number 35011. New Part, repainted as the 30 year old paint was failing...

YOKE PTO with Plate Flange. Plate 6.00"OD. This is new OEM New Holland part number 86541154. NH Models 1431, 1432 Overrunning Clutch.

87480 Bush Hog Series 44 PTO YOKE, 1-3/8" 6 Spline Bore OEM Bush Hog Part. 44 Series Cross Bearing, Internal Snap Rings Cross Drilled 5/16" Interchanges with Weasler 801-4406, NEAPCO 44-2206 109 Rotary Cutter109-Offset Rotary Cutter126 Rotary Cutter87480...

Yoke, Flange Yoke Weld Assy. NH Models 408, 411, 415. Related part Cross Bearing 84355319 replaces 129437 SPIDER.

87479 Bush Hog Series 35 PTO YOKE, 1-1/8" 6 Spline Bore New OEM Bush Hog Part. 35 Series Cross Bearing, External Snap Rings Cross Drilled 5/16"