BEARINGS - Needle

1168756 AGCO Deutz Needle BEARING This was wrapped in tape at some point in the distant past. I can't see any rust on the inside or through the tape. This is an OEM Deutz part.

CUP Asy. 1.53"OD

Needle Bearing and HOUSING Bearing 1.00"ID x 1.37"L Cross Holes .43"ID 1.37"W Center Opening 2.40"W Overall  Yes the bearing is dirty from past storage, it is no longer open to more debris. I will vacuum and properly clean at time of shipment. The...

Needle Bearing. Torrington B-2220 1.375"ID x 1.625"OD x 1.25" Wide; 40 year old Made in USA Bearings .. The good stuff. Torrington B-2220. Ships in a vintage AC Orange and White box if that matters...

BEARING ALTERNATOR. 71142670 Replaced by 70262754. NDH MNJ471S

BEARING / NEEDLE Closed End. 0.687"ID x 0.937"OD x 0.625"W

BEARING, Needle Bearing Torrington Made in USA.  .62"ID x .81"OD x .50"W

NEEDLE Bearing, Torrington B-1212, Made in USA. .75"ID x 1.00"OD x .75" wide. 19.05mm ID x 25.4mm OD x 19.05mm W. New Holland 167073, 14228 AGCO Allis-Chalmers 70208253  

BEARING, NEEDLE Bearing Torrington  B1416 Made in USA .875"ID x 1.125"OD x 1.00" W.  AGCO Gleaner 74253262 This was originally sourced from AGCO.

Needle Bearing, B2016-OH, 1.25"ID x 1.50"OD x 1.00" wide These are old Torrington USA new stock. AGCO supersedes 70604435 to KS5045. New Holland  LS3389S Replaces 36312, 271274R91, 73005860, 7712235, 80036312

BEARING Needle Bearing, 1.50"ID x 1.875"OD x 1.00" Wide. AGCO 72161722 Replaces 70529021. These are old USA new stock. 

BEARING Needle Bearing, Torrington BH-1816. 1.125"ID x 1.50"OD x .75" wide. This came from CNH as 292193. Other part numbers below. 272193, 70930440, 143996H1, 157097042, 3043047R91, 3114516R1, 454257R91, 50-2792T1, 751075R91, 80272193, 81860166, F60368,...

BEARING, Needle Bearing, Torrington Made in USA .625"ID x .875"OD x .75"W AGCO Allis-Chalmers, Simplicity part numbers 2025346, 72025346, 70930410

BEARING Thrust Bearing.    .75"ID x 1.235"OD x.078"T. GB33589, LB701021, 8571, 33589, 701021, 33589 Replaced by 99-383.

S88 INA Needle Bearing, .50"ID x .68"OD x .50" W. Made in USA. *at picture for search engine add, 679144 Lawn-Boy

SBA042200218 CNH Ford New Holland BEARING Needle Bearing RING Used in models: 1210, 1110.SBA042200218 Replaces 83940964

BEARING Needle. 81872842, 042219003 supersede to SBA042219003.

BEARING NEEDLE Bearing, USA INA SCH1612 1.00"ID x 1.31"OD x .75" W. CNH shows 308674R1 Replacing 308674R91, 66810, 80066810, 86550571 AGCO Allis-Chalmers 72025277