Other

100100 BRACKET

Bushing 1 grease hole in side 2.00"ID x 2-3/16"OD x 1.50" wide .32" side hole Split Wall Design stamped FM

Pull SPRING  .58"ID x .75"OD x 4.54"L x 3.35"L Coils x .08"OD Wire.

SLEEVE BUSHING. .39"ID  x .62" OD x 2.15"Long on smaller portion; The collar/large end 1.00"OD x .36" Long.  Overall 2.50" long overall. Sold Individually.

Mower Blade 16.62" long x 2.50" wide x .20" thick with a .75"ID hole. CCW.

NUT, Cap Actual sizes, not technical sizes 2.50"ID x 2.96"OD x 1.38" tall x .31"ID side hole, no threads in side hole. Smaller Ring is 1.96"ID Casting Number 241005

13768 Aluminum RETAINER

Mower Blade 14.75" long x 2.00" wide x .37"ID hole x .15" thick. CW.

Mower Blade 16.75" long x 2.50" wide x .50"ID hole x .20" thick. CW. Oregon 91126.

Mower Blade 16.18" long x 2.00" wide x .37"ID hole x .15" thick. CW.

Mower Blade 16.87" long x 2.25" wide x .55" X .75" ID oblong hole. 3/16" rise between center portion and outer cutting edge portion. Gold in color. CW. .16" thick.

Mower Blade 17.37" long x 2.00" wide x .69"ID hole x .20" thick. CW. Flat blade, no rise/fall from mounting hole area to cutting edge. Has a small amount of lift wing behind cutting edge.

Mower Blade 18.00" long x 1.75" wide x .87"ID. CW. No part number or brand information.

Mower Blade 18.00" long x 2.00" wide with an oblong center hole .87" x 1.25"ID. CW Rotation.

Mower Blade 18.81" long x 2.00" wide x .75"ID center hole, outer holes .50"ID on 2.25" centers. CW. Silver Color.

Mower Blade 18.87" long x 2.50" wide x .62"ID hole. CW. Flat blade - no rise/fall from mounting surface - bolt hole area to cutting edge. Very little lift edge at back of cutting edge. Length is...

Mower Blade. 16.87" long x 2.50" wide x .50"ID hole x .20" thick with. Clockwise. 18212, 91-123, 91123, Blade Stamped H1666

Mower Blade 19.37" long x 2.93" wide x .95"ID hole. X .13" thick. Back edge is formed up along backside of cutting edge and continues by the mounting hole area, .35" rise, so it is not flat across...

Mower Blade 21.00" long x 2.75" wide x .87"ID Center/one hole x .19" thick. CW Rotation. Flat-no drop from center portion and no lift edges on backside of cutting edge.

Mower Blade 21.75" long x .88"ID center hole, 8 holes that are 5/16" in a circle around center hole, these center at 1-1/2" across. CW.