PULLEY SECTION

Pulley, Drive Pulley, New OEM Lawn-Boy part number 606170.

Pulley, New OEM Lawn-Boy part number 609976. Free Shipping.

Pulley, Drive Pulley, New OEM Lawn-Boy part number 610035.

Pulley, New OEM Lawn-Boy part number 678252. Free Shipping.

Pulley, Cable Pulley with bearing. .25"ID x 1.50"OD. New OEM Lawn-Boy part number 679145. Free Shipping.

GUIDE, IDLER Pulley, Plastic Guide, Roller .65"ID x 1.97"OD x .71" wide. Used in models:848, 849, 851. New OEM New Holland part number 698371 Replaces 621745.

PULLEY Cast Pulley 1.00"ID x 3.00"OD x 1.00" Wide at hub x .34" Wide at top of V Belt Grove.

Pulley Cast metal 1 has bushing, 1 w/o bushing. Bushing .50"ID x .75"OD. Overall .60" wide x 3.25"OD. New OEM Allis Chalmer Part Number 70341999.

PULLEY Two Piece. Bolt holes are .27"ID on 3.37" center. The belt area is 2.00" x 6.87"OD Overall width is 2.62".

Sprocket 8T 4.80"OD and pulley 1.25"ID x 7.90"OD x 3.25" total width. Casting number 525321 .

PULLY Cast Disc pulley with groove, chipped. .27"ID x 2.00"OD x .50" Thick. New OEM Allis Chalmer Part Number 70535582.

PULLEY, Half, For adjustable pulley / sheave setup.. Center hole 1.75"ID with five outer holes .39"ID x 3.00" measured across. 6.55"OD overall x .75" overall thickness. . The 70802954 is shown in 3 / 5 / 7 / B / C / B-IND / WC SICKLE BAR MOWER as...

Pulley and Hub Assembly, Triple V Belt Sheave, Used New Holland part number 708243. Used on 851 NH Balers with 1000 PTO only. Used

SHEAVE Pulley double. Grease zerk. New OEM AGCO Gleaner part number 71109635.

Pulley double. Grease zerk. USED.

PULLEY, SHEAVE, Threaded ID and 5.50"OD x 1.12" wide. 3/4" wide at top of V. New old stock part.

Idler Pulley, Flat back .50" ID x 6.25" OD x 1.00" wide surface width x 1.44" overall width, bearing race width .75". At inventory time there was one with surface rust at a discounted price, search 71126422U. New OEM AGCO Gleaner part number 71126422.

Idler Pulley, Flat back .50" ID x 6.25" OD x 1.00" wide surface width x 1.44" overall width, bearing race width .75". New OEM that has gotten wet at some point and has some surface rust on bare metal. Bearing turns fine without rough spots. Selling as...

PULLEY, SHEAVE, 1.25"ID X 10.75"OD x 1-1/4" wide top of V. Tapped for set screw. 1/4" keyway. Casting Number 61U-41, 61U41. Paint chipped. Cast metal material. New OEM AGCO Gleaner part number 71130099.

PULLEY, SHEAVE, 1.34"ID x 6.50"OD with 4 mounting holes .37" ID on 2.00" centers diagonal. For 7/8" belt. Cast metal. New OEM AGCO Gleaner part number 71130234.