Sprockets - Single

SPROCKET, 48T #50, Keyway 1/4" wide includes set screw. 1.00"ID x 8-7/8"OD x 1.25" wide hub/collar. Sprocket, Driven, Pick-up. NH Models 77, 87, S77, 98.

SPROCKET, Single, #40 chain, 18 Teeth, 1.75" ID x 3.12" OD. 029 AUGER & PICKUP DRIVEN Models 87, S77, 98

SPROCKET, 24T #50. Center hole splined. 5-1/16"OD. 717, 718, 770, S717  

SPROCKET with Shaft, 19T #50 chain. 1.12"OD x 4.12"OD. Shaft 8.12" long actual shaft-inside sprocket to end x with a woodruff key opening .25" wide.

SPROCKET 19T, #445 Pintle Chain 1.63" Pitch. 12006 Casting Number. Pick-Up Chain Idler Sprocket Assembly. APPLICATIONS: S77, 87, 98 NH New Holland Balers. Plastic plugs are still in the hole. Sold Individually.

 SPROCKET, Single, #50 Chain, 36 Teeth; Smooth Bore 3.00"ID x 7.50"OD. 962 New Holland Head Auger Drive. NH Corn Heads 962N3, 962N4, 962N6, 962W4, 962W5.

SPROCKET, 23T #50 Chain, 1.00"ID x 4.87"OD x 1.25" Wide Hub with grease zerk. Bronze Bushing Insert. TR Series Combines.

SPROCKET, 7T, Cast iron slip clutch jaw style 3 jaw clutch. New old stock.

27527 New Holland 19T #2050 SPROCKET 1.12'ID

SPROCKET w/ Slip Clutch Hub. 11T, 1.12"ID x 4.62"OD x 1.50" wide at hub. Casting number 28203.

SPROCKET and Hub, Single, #50 chain, 19 teeth; 1.36"ID x .37" wide keyway x 5.00" wide overall. Hub has 2 setscrews and lock nuts. Application: NH Models 818 and SP818, Engine Drive at Gearbox, 020 ENGINE SHEAVES & IDLER GROUP - 818,SP818. New OEM...

SPROCKET, 20T #60 Chain Clutch Hub with grease zerk. 1.25"ID X 5.25"OD. X 1.50" wide at bushing. 2.00" overall width. NH Models 841, 842

SPROCKET, Single, CA550 Chain, 27 Teeth; TINE BAR, DRIVE & CAM TRACKS, Related part Needle Bearing 37326 - 2 used in this sprocket. New OEM New Holland part number 40978. 78, 178, S78, 202T

Sprocket w/hub. 15T #40. w/ two set screw. .75"ID X 2.62"OD X 1.00" wide hub.

SPROCKET, Single, 7 Teeth, 2050 Chain .87"ID x 3.25"OD x 1.25" wide at hub. Has Bushing Insert.

Sprocket 20T #41, .75"ID x 3.38"OD x 1.14" wide at hub. Has 2 set screws.

Sprocket weld square tube, 20T #41 chain, 3.38"OD x .91" inside square tubing x 1.12" outside square tube x 2.25" long.

SPROCKET, no hub, 13T #CA550 and CA557 Chain Pitch 1.63", with 4 tapped holes. 3-7/8"ID x 7-1/2" OD. 570914 replaced by 708521. This is new OEM New Holland part number 570914. NH Balers 845, 846, 847, 851, 852.

Sprocket 13T, 21 Spline. 59381031 supersedes to KIT Number 60650. This is 59381031 Sprocket.

SPROCKET, Single, #35 Chain, 30 Teeth.