Sprockets - Single

Sprocket 10T. .75"ID x 4.12" OD. Width at hub is .85". Casting number 346680.

SPROCKET / HUB 1 SIDE. 10T Double Spaced. .65" X 65" square center hole, can also fit on 3/4" round shaft, 7.80"OD x 1.50" wide. Casting number 311614. 70311614 shows up on Planter Hopper Fertilizer 600 Series pull type. Casting number 311614. ...

Sprocket 14T, Center hole .87"ID x 8.80"OD, sprocket teeth .65" wide. 500674 is casting number.

SPROCKET Clutch 12T, 1.25"ID x 4.80" OD, overall width 1.75", slip clutch has 4 cogs, 3.00"OD of cog hub, casting number 502319.

Sprocket 10T, square hole .77" X .77" ID, overall width 1.00" x 4.20"OD. Casting number 502343.

Sprocket 12T, .75"ID x 5.00"OD x 1.50" wide with hub. .25" keyway. Casting number 3202AC.

Sprocket 15T #60 x 1.12"ID x 4.00"OD x 1.76" Wide Hub with .25" wide Keyway. Casting number 505597. 70505597 supersedes to 70515824 . This is part number 70505597.

Sprocket 12T .75" ID x 5.12"OD x 3.00" wide including hub.

Sprocket w/ hub, 22T #50, Center hole is .87"ID x 4.70"OD x 2.25" overall Width at Hub. Casting number 509839. This part has old hand number of 509939. I suspect that the number was written incorrectly, but strange things happen in the part numbering...

SPROCKET 8T .62"ID x 4.80"OD slip clutch jaw-style w/ sprocket, casting number 510230. 66 ALL CROP HARVESTER ("B" SERIES) drive reel.

SPROCKET CLUTCH HUB 11T, 1.37"ID x 6.25"OD x 1.87" wide at hub. Casting number 510245.

Sprocket 12T #50, 1.00"ID x 2.70"OD x 1.88" Wide, with cage roller bearing. Roller bearing not in best condition.

Sprocket 9T .86"ID x 4.00"OD x 1.40" Wide at hub, Has set screw. Casting number is 503628 "drive".

Sprocket 12T open center 2.60"ID x .56" wide. Casting number 517651. 66 ALL CROP HARVESTER ("B" SERIES),

Sprocket 35T #50 Chain, 1.00"ID x 7.30"OD

SPROCKET, 11T #50 1.12"ID. 66 / 72 / 90 ALL CROP HARVESTER (TWO ROW CORN HEAD)

SPROCKET, 14T #50 Threaded inside.

Sprocket 8T 4.80"OD and pulley 1.25"ID x 7.90"OD x 3.25" total width. Casting number 525321 .

SPROCKET 17T #50 chain. .85"ID x 3.68"OD x 1.31" wide. 1/4" keyway. 240 / 340 / 440 SERIES (MODELS A / C / E / EIII / F / G) CORN HEADER

Sprocket w/ hub 13T, .75"ID x 5.50"OD x 1.95" total width. Hub has 6 tapped holes. Hub 4.25"OD x 2.50"ID Collar. Casting number 532644 .