Sprockets - Single

SPROCKET, 32T #60. 1.35" ID X 8.00" OD X 1.25" wide at hub. Uses four mount holes This is a NEW OEM AGCO part. L2 / L3 (EFF S/N 13001-28000) COMBINE; L3 (EFF S/N 28001) / M3 (EFF S/N 25901) COMBINE; M2 / M3 SERIES COMBINE (EFF S/N 15401-25900).

SPROCKET, 54T #50. New Old Stock AGCO Gleaner part. R40 / R50 COMBINE 71360721: SPROCKET ASY., 54T, auger driven.

SPROCKET, 12T, Hex ID. 766379 Replaces 618705, 763651. TR and CR series New Holland Combines. This is OEM NH part number 766379.

IDLER Sprocket .50" ID x 4.75"OD, 8 teeth. 87034967, 84416204, 84416205, 84471411, 84471412, 87593314, 87593314E, 47365065,176283C91 and 87607076 all supersede to 84549635. This is part number 87034967.

Idler Sprocket, 15 teeth, .50"ID x .32" wide x 2.62"OD. There is a small indentation in one spot on the seal. Does not affect the performance of the part, cosmetic.

No part number. Sprocket Cast with bushing inserts .87"ID, 7 teeth, Overall width 2.53" x 4.00"OD, Tapped port for grease zerk. On long side of hub which is 1.125" from end to side of sprocket, other short side of hub is .60" from end to side of...

No part number. Sprocket Cast #CA557 Chain, 7 teeth, .87"ID bore no set screw or keyway, cross drilled .30"ID and is .31" from end of hub to center of hole. Overall width 1.62", hub is flush with side of sprocket on one side, the other side the hub...

Sprocket, 8T, 1.00"ID x 3.37"OD, 1.50" wide at hub w/ .31" keyway. Stamped H8070A.