Other

Mower Blade 23.75" long x 3.00" wide x 1.37"ID hole. Reversable, Flat blade with two sets of cutting edges so it can be flipped over to use both sides. CCW. Stamped 15715.

Mower Blade 24.00" long x 2.00" wide x .40"ID Center hole, 2 outer holes .26" ID on 2-1/4" centers x .12" thick. CW.

REDUCER Adapter SLEEVE Male 1/2"-13, Female 5/16"-18

3-5014 Wico Distributor CAP And Gasket

Pull SPRING .60"ID x .87"OD x .13"OD wire x 8.00"L between hooks

Pull SPRING .27"ID x .38"OD x 2.33"L between hooks

Mower Blade 20.00" long x .87"ID hole. CW. Breakaway style.

Mower Blade 16.12" long x 2.00" wide x .37"ID hole x .13" thick. CW. Noma Replacement Blade: 782971, 54883, 56820, 56822, 42433, 25631, 8684

Mower Blade 16.37" long x 2.50" wide x .12" thick with one hole .62" by .75"ID oblong. CW.

50-3001022-A1_Belarus_Compression_SPRING_. 503001022a, 509713204. Agricultural Tractor Models 102, 500, 520, 562, 572, 820, 822, 825, 925, 1025, 5150, 5160, 5170, 5180, 5190, 5260, 5270, 5280, 5290,...

50283046 1/4 Turn Latch FASTENER

Hold Down Casting Number XL1200 Germany There were 12 at the time entered here, if interested in multiple pieces contact for a discount. I took pictures of the ugliest ones, the rust is...

BRACKET.  This is a used part.

Blade SPACER 5/8'' x 1.00'' x 7 Ga/  or .185" or 3/16 Thick, fits into 1.00" Blades. CNH has 87613215 Replaces 21471R1, 479845R1, 495-81175(is a thin washer .059"T.), 578274R1, W0D6520, 65207...

Mower Blade 21.75" long x 2.25" wide, 1.00"ID center hole, outer holes are oblong .375" or 3/8" wide x 1.05" long and are on 3.50" center. CW. Oregon number is 90-026, 90026 which supersedes to...

999818R91, 91108 Lincoln Industrial 91108 Filler Nipple including Ball Check, used with Hand/Air Operated Grease GunsUsed with FILLER SOCKET 80133IH Part Number 999818R91Hand guns can be loaded using...

C10D0022 Walton Blocking PIN KIT

DA8701054 LH BOLT 5/8"-11 x 1.50", Grade 5. These DO NOT have the Thread Lock Plug Inserts.   It is recommended to use a Thread Lock compound. Ford New Holland Part Number DA8701054. Sold...

Mower Blade 16.75" long x 2.50" wide x .50"ID hole. CW. .20" thick

No part number. Sprocket Cast with bushing inserts .87"ID, 7 teeth, Overall width 2.53" x 4.00"OD, Tapped port for grease zerk. On long side of hub which is 1.125" from end to side of sprocket,...