Bush Hog - Alamo

Gang Bolt, 57.75" long overall x 1.12". Threaded on both ends. New OEM Bush Hog Gang Bolt 11750095.

WASHER PIVOT TUB. 2.08"ID x 4.06"OD x .37" thick.

Double Center U Joint Assembly. *** 7.25" long center on the cap holes.*** This is a 35 Series Double Yoke 1.25" Caps External Snap Rings. Please verify which size cross bearing you have...

Turnbuckle 3/4"-10 NC RH and LH x 5.75"L 

Spacer    .66"ID x 1.14"OD x 3.25"W.

PRESSURE PLATE, 7.87"OD x 101mm ID x .62" or 15.75mm thick. Has 9 holes, 2 sets of 2 evenly spaced then 5 in a row which 1 the middle one is not used and all 10mmID. These never had paint and have a...

SHIM Washer gearbox 1.586"ID x 2.027"OD x .0196"T New OEM Bush Hog part.

PRESSURE PLATE, 7.60"OD x .50" thick x 3.90"ID/ 90mm ID. Has 8 holes 10mm ID and evenly spaced. New OEM Bush Hog part number 76086 The LINING part number is 76083.

Spacer 1.01"ID x 1.50"OD x .50"W We combine shipping on orders. The website should do this automatically for you. If it doesn't, let us know and we'll get you fixed up or run the order and we'll...

87480 Bush Hog Series 44 PTO YOKE, 1-3/8" 6 Spline Bore OEM Bush Hog Part. 44 Series Cross Bearing, Internal Snap Rings Cross Drilled 5/16" Interchanges with Weasler 801-4406, NEAPCO 44-2206 109...

SHIELD WELDMENT, JACKSHAFT Top 11.00" front to back. Stands 6.25" tall when measuring the outsides of metal. Width is 8.38" OD- dimension. Mounting holes are 2 - .43"ID on 2.50" centers. Has 2 access...

Mower Blade 17.00" long x 2.50" wide x .50"ID hole. CW. Bush Hog 94764, Red Stamped 6035. Snapper

CUFF Clamp Axle Bearing Cuff with grease zerk. 8-5/8" x 4" x 3" tall.

87479 Bush Hog Series 35 PTO YOKE, 1-1/8" 6 Spline Bore New OEM Bush Hog Part. 35 Series Cross Bearing, External Snap Rings Cross Drilled 5/16"