New Holland

000950 New Holland Wood SLAT Wood Strip 20.00"L New, but really old stock OEM New Holland part.

Board 30-3/16"L

Shaft, New OEM New Holland Part Number 12167. 15"L x 1.43"OD with flat spot on each end.

Shaft and Guard, New OEM New Holland Part Number 122731. Threaded both ends. 5.25" overall length x 3-5/8" OD of collar. Used on New Holland Models 741, 742, 880R

Pickup Cam COVER, Guide 8.75" x 15" x 1.50" overall dimensions. NH Models: 77, S77, 87, 98

Pulley, Pulley and Hub. 1.20"ID x 12.75"OD. New OEM New Holland Pulley part number 139491 Replaces 80127908, 80139491. NH Models 460, 461.

Shaft. 10-5/16" long X .97"OD on largest part x .75"OD on next size smaller section w/ snap ring groove. 9 splines on one end. Please inspect pictures and measurements closely to make certain this...

SHEAVE Pulley, 16.375"OD x 2.28"ID. Excellent condition. New OEM New Holland part number 249166. Grease coating still on the inside bore. Applications TR70, TR75, TR85.

289540 New Holland Round MIRROR, NH Models: 919S, 1900, 1915, 2100, 2115, TR70, TR75, TR85, TR86, TR95.

Pulley, IDLER Pulley Chain Flat Idler Spool Roller Steel, 1.12"ID x 3.25" OD x 2.25 outer width x 1.75" inner channel width. New Holland 600, 610 - NH PULL TYPE FORAGE HARVESTER(07/50 - 06/56) ...

Pulley, V Pulley, 1.00"ID x 9-7/8"OD x 2.25" Wide Hub. Keyway.25"wide.Includes set screw. Belt groove 7/8". Casting number Z222 .

Pulley, Double V Pulley. New OEM New Holland Double Pulley part number 40228.

SHAFT, Jack Shaft New OEM New Holland 10489. 7-13/16" x 1.00"OD with 2 woodruff key cutouts and one .32" ID hole. Fits Models: 330, 331, 335, 336.

PULLEY, Single V Belt SHEAVE. New OEM New Holland part number 49594. 2.30" ID X 8.00" OD. V belt groove 1-1/16" at top of V. Mounting holes three 1/2" holes. New Holland 616 - NH PULL TYPE...

KIT STEERING Shaft TR 75/85/95 Combines. Shaft 25-5/8" (651mm) Long. This kit can be installed on machines which require more than normal effort to steer. It will reduce extra steering effort due to...

Pulley and Hub Assembly, Triple V Belt Sheave, Used New Holland part number 708243. Used on 851 NH Balers with 1000 PTO only. Used

71167 NEW Holland PIN Piston Wrist Pin Standard DE65 13.25mm ID x 19mm OD x 64.74 Wisconson Part Number DE65 TFD - WISCONSIN 2 CYL GAS ENGINE(01/55 - 12/85)THD - WISCONSIN 2 CYL GAS ENGINE(01/57 -...

SHAFT 55.50" long X 1.80" Shaft at the Hex portion tapers down to splines on one end and threaded on the other. Part numbers 695479, 718076 supersede to 762733. This is new OEM NH part number...

87726663_New_Holland_COIL_ 87726663 Replaces 83960114, D0PF12029A, D3PF12029AA, D4PE12029AA, D4PE12029AAGV, E8TF12029BA. IGNITION COIL IS DESIGNED TO BE USED WITH EITHER 6 OR 12 VOLT ELECTRICAL...

9803096 PADDLE 9803096 Replaces 126219, 80126219 NH Models 717, S717, 718 Forage Harvester